This is an example to connect CarMaker with CANoe for a Rest Bus Simulation of a generic ACC system via FMU.

FMUs are used to exchange models conveniently between different tools directly as black box (or grey box) models. This example is based on FMU standard 1.0. The aim here is to obtain input signals to the FMU from CarMaker, then use these signals in CANoe where the ACC function is implemented and finally to give the output from the FMU back to CarMaker. The controller is a very basic open loop proportional gain speed control since the aim of the example is to establish the connection between the tools and not develop the function.