3D Mapping Solutions GmbH is one of the leading experts in the field of high-precision kinematic surveying of public roads, proving grounds, race tracks and road surfaces of any kind. Within the partnership with IPG Automotive, high-precision reference maps are created for CarMaker from measurements by 3D Mapping Solutions, to serve as a basis for vehicle dynamics and ADAS development as well as testing and validation of autonomous driving applications.
AB Dynamics and IPG Automotive have entered into a technological partnership for the accelerated development of advanced driving systems. The acceleration is achieved by improving the use of CarMaker on the advanced Vehicle Driving Simulator (aVDS), which is specifically designed for driver-in-the-loop development of road vehicles. In addition, the partnership focuses on optimizing and converting data generated from the SPMM 5000 vehicle K&C test machine into CarMaker. The SPMM 5000 allows accurate measurement of center of gravity and moments of inertia for vehicles and vehicle components.
adletec IT-Solutions provides intelligent out-of-the-box solutions for automotive manufacturers, suppliers, scientists and racing teams. Based on the requirements of a driving simulation with audio feedback, adletec developed the official audio module for CarMaker: SoundMaker Professional. This add-on module comes with a full-fledged OpenAL 3D audio engine with real-time audio-sink adjustment, IPGMovie integration and network support.
As part of their partnership, AIP Automotive – a leading manufacturer of vehicle test systems for the realistic reproducible simulation of road tests – and IPG Automotive closely collaborate on the optimum integration of IPG Automotive's software CarMaker/TestBed and real-time hardware with AIP Automotive’s chassis dynamometers. In addition to the continuous maintenance of the interface to AIP Automotive’s dyno control, the cooperation focuses on coordinated customization as well as joint commissioning.
Ansible Motion creates Driver-in-the-Loop (DIL) simulators for vehicle engineering. IPG Automotive and Ansible Motion cooperate to use CarMaker vehicle models on the DIL simulators of Ansible Motion.
cosin scientific software
cosin scientific software develops the leading software FTire (Flexible Structure Tire Model), a fully physics-based non-linear 3D tire model. Combined with different road models and using flexible rim models as well as a powerful toolbox to process tire and road data, FTire is the most comprehensive software package for tire dynamics simulation.
As part of the partnership with IPG Automotive, an interface between FTire and IPG Automotive’s CarMaker and TruckMaker was developed which enables the flexible use of highly precise virtual tires in test drives of various complexities for a broad range of use cases such as the development of ADAS.
The Research Institute of Automotive Engineering and Vehicle Engines Stuttgart (FKFS) is an independent institute and provides research and development services for the automotive industry. The FKFS cooperates with the University of Stuttgart Institute of Internal Combustion Engines and Automotive Engineering IVK. Within the partnership with IPG Automotive, CarMaker is used for numerous online and offline simulations in the field of ADAS, automated driving, chassis system control, driving dynamics and powertrain. For subjective evaluations CarMaker is also used in the Stuttgart Driving Simulator.
Gamma Technologies is the developer of GT-SUITE, the leading 0D/1D/3D multi-physics CAE system simulation software. In cooperation with IPG Automotive a direct tool interface between GT-SUITE and CarMaker/TruckMaker was developed and is jointly maintained to provide a user-friendly way to perform co-simulations in the office (PC-based applications) and with HIL applications.
As part of their partnership, HORIBA and IPG Automotive closely collaborate on the optimum integration of IPG Automotive's software CarMaker/TestBed and Xpack4 real-time hardware with HORIBA's propulsion system test benches (engine, chassis and powertrain). In addition to the continuous maintenance of the standard interface for test bench operation with the automation software STARS, the cooperation focuses on coordinated customization as well as joint commissioning.
KRATZER AUTOMATION utilizes IPG Automotive's CarMaker product family to satisfy corresponding customer requirements (e.g. driving RDE cycles). For this purpose, KRATZER AUTOMATION and IPG Automotive closely collaborate on the optimum integration of IPG Automotive's software CarMaker/TestBed and Xpack4 real-time hardware with KRATZER AUTOMATION's propulsion system test benches. In addition to the continuous maintenance of the standard interface for test bench operation with the automation software PAtools, the cooperation focuses on coordinated customization as well as joint commissioning.
As part of their partnership, KS Engineers and IPG Automotive closely collaborate on the optimum integration of IPG Automotive's software CarMaker/TestBed and Xpack4 real-time hardware with KS Engineers' propulsion system test benches. In addition to the continuous maintenance of a standard interface for test bench operation with the automation software Tornado, the cooperation focuses on coordinated customization as well as joint commissioning and customer support.
MSC Software is the developer of ADAMS (Automatic Dynamic Analysis of Mechanical Systems), the multibody dynamics simulation solution. IPG Automotive and MSC Software have entered into a technology partnership for collaborating on the seamless conversion of ADAMS model data into CarMaker model data.
nVIZ develops solutions for test driving in virtual reality. CarMaker is integrated in the compact driving simulator designed by nVIZ to simulate physically correct vehicle dynamics in real time for developing driver assistance systems and automated driving functions.
As part of their partnership, OPVengineering and IPG Automotive closely collaborate on the optimum integration of IPG Automotive's software CarMaker/TestBed and Xpack4 real-time hardware with OPVengineering's propulsion system test benches. In addition to the continuous maintenance of the standard interface for test bench operation with OPVengineering's automation software, the cooperation focuses on coordinated customization as well as joint commissioning.
Managing the huge and constantly increasing amount of simulation data is an increasing challenge for large-scale usage of virtual test driving. To help solving the challenge of global engineering collaboration and traceability using centrally managed, structured and qualified data, PDTec is working with IPG Automotive to develop and provide a data management solution for CarMaker: SDM4CM.
The Karlsruhe-based companies PTV Group and IPG Automotive offer a complete solution for driving simulation in a virtual environment. This is made possible by a specially developed interface which enables the connection between PTV Group’s traffic simulation software PTV Vissim and IPG Automotive's CarMaker product family. Research and development teams utilize the co-simulation with both simulation tools as a foundation for the development and validation of driving functions and vehicle properties taking a variety of simulated traffic situations into account.
QTronic develops Silver, the leading software for building and executing virtual ECUs (vECUs). The scope of vECUs ranges from pure application software to full target chip simulation including a virtual operating system on a Windows PC. The collaboration with IPG Automotive encompasses the development and continuous maintenance of the interface between Silver and the CarMaker product family. This enables the integration of one or several Silver vECUs into the CarMaker simulation environment for function development, validation and testing under real driving conditions.
rFpro has partnered with IPG Automotive to provide a combined solution for the testing of vehicle dynamics as well as perception and control systems for ADAS and automated driving systems. The entire IPG Automotive toolchain can execute tests and experiments within physically modeled rFpro digital twins of real-world test locations. Additionally, scenarios created in IPG Automotive’s Scenario Editor may be single-click converted to run in rFpro and its photorealistic graphics engine.
As part of their partnership, Rototest and IPG Automotive closely collaborate on the optimum integration of the software CarMaker/TestBed as well as Xpack4 real-time hardware with the Rototest propulsion system test benches. In addition to the continuous maintenance of the standard interface with the automation software ROTOTEST DynoVision, the collaboration focuses on coordinated project-specific customizations as well as joint commissioning and customer service.
S.E.A. provides customized turnkey test and measurement solutions for communication and electronic/mechatronic systems. One key focus of S.E.A. are test solutions for all aspects of V2X, from RF over protocol up to full ADAS HIL tests. The S.E.A. V2X communication products are based on National Instruments Software Defined Radios as well as GNSS simulation by M3 Systems. Within the partnership with IPG Automotive, CarMaker is used for vehicle and traffic simulation, which complements the overall concept of integrated V2X ADAS simulation.
Stähle Robot Systems
Stähle Robot Systems is a leading global provider of robot and proving ground driving systems for precise, reproducible and automated testing of vehicles and vehicle components. Designed for seamless use, the software “STAEHLE DRIVERMODULE“ as well as the “AUTOPILOT GUI” serve to perform development, exhaust gas and homologation driving cycles. In collaboration with IPG Automotive, a direct high-performance tool interface with the CarMaker product family was developed. This allows the seamless use of the same cycle driver with its various human driving styles throughout all development stages (MIL, SIL, HIL and test bed) as with the driving robot on the chassis dynamometer.
TraceTronic develops tools which focus on the automated testing and highly efficient validation of automotive software. The TraceTronic toolchain consisting of ECU-TEST, TRACE-CHECK and TEST-GUIDE allows to automatically evaluate scenario-based tests with IPG Automotive's CarMaker product family and to analyze them graphically. The resulting solutions offer continuous testing ranging from MIL, SIL and HIL to vehicle tests.
XPLM – the Experts in Product Lifecycle Management (PLM) work with IPG Automotive on the connection of the CarMaker product family to leading PLM solutions. The connection to existing PLM systems using an integrated tool interface is designed for user-friendly model and simulation data management for model-based engineering (MBE) within the vehicle development process.